biometric fingerprint lock

1.High Security-ANSI standard mortise 2.Suitable for home and office 3.open mothed: fingerprint/mechanical keys

Functions of the biometric lock

1.International standard bolt, extremely safe and reliable;

2.Imported micro-motor gearing, good reliability, low power consumption;

3.Fingerprints can be managed in groups, can add delete and empty one by one;

4.Have the function of normally open, convenient for office business;

5.When decoration, can set password to open the door or add temporary fingerprint, password can be canceled at any time;

6.Large storage capacity, up to 200 fingerprints;

7.Self-management, when using locks, can increase delete and empty the fingerprint and can set to open the door with single-fingerprint or double- fingerprint, password, users fingerprint, temporary fingerprint, which is convenient for operation and management;

8.If the door does not close, lock will sound the alarm automatically, strengthen security;

9.After low-pressure alarm, the lock can be opened 30 times, management fingerprint is unrestricted;

10. Applicable to the offices, banks, home, etc.

.2 Main Performance Parameters

Fingerprint Capacity: 200

Time of Verification and Comparisonless than 2 seconds

False-Rejection-Rate (FRR)less than 1.5%

False-Acceptance-Rate (FAR): less than0.001%

Static Power Consumptionless than 5 microampere

Dynamic Power Consumptionless than 150 milliampere

working voltageinternational standard batteries, Four 1.5-volt alkaline batteries, direct current 6-volt

Under voltage target: less than 4.5 volts

Management Fingerprint8

User Fingerprint80

Temporary Fingerprint112

                  Factory Default Values

1    Factory programming code1111-2222

2    Factory password to open the door1111-1111

3    Factory registered fingerprint1 long press1 short press

Lock Initialization

Press the inching switch on main board J2,blue light flashing after releasing,enter the process of lock initialization,lock initialization is successful after two short-beep.

    After leaving factory, the lock can be opened by password or registered temporary fingerprint; if modifying programming code or registering management fingerprint, the password becomes invalid, but the registered temporary fingerprint can remain in force.

1. Password to open the door

  Before leaving the factory, fingerprint lock has set the 8- figure password. And before changing the programming code or registering management fingerprint, the lock can be independently opened through inputting the password.

Operation Steps:

First step: press any key, fingerprint screen lights up;

Second step: press any key again, fingerprint screen blacks out, red indicator light flashing;

Third step: input 8-figure password to open the lock, red light goes out and a blue light lights up, then the lock is opened.

2. Change factory password

First step: press "0" for 5 seconds,lock sounds "tick", red light lights up, release button at that time;  

Second step: press "3", beep twice, and blue light lights up, input the original password. After being proved to be successful, the door sounds two long-beep;

Third step: During blue light flashing, input password first time;

Fourth step: During red light flashing, input password second time;

Fifth step: check no problem, lock sounds twice short-beep, modify password successfully.

3. Steps of registering temporary fingerprint:

First step: press "1" for 5 seconds,lock sounds "tick", red light lights up;

Second step: then press "2"; release the key, red light lights up;

Third step: fingerprint screen lights up, put finger on the window, after one short-beep, finger keeps being placed on windows, after two short-beep, the registration is successful, remove finger;

Fourth step: back to first step to circulate, or press any key to finish.

Programming Code

2.4.1 Programming code

  The 8-figure password is set before leaving factory and used to do all operations under the circumstances of no management fingerprint, once register management fingerprint, its role is automatically canceled.

2.4.2 Change programming code

  For security, we suggest you modify the programming code at once after buying the lock, or registering management fingerprint. Operations of changing password are as follows:

   First step: press "2" for 5 seconds,then red light lights up, lock sounds "tick";

   Second step: then press "3", release the key, red/blue light lights up, the lock sounds two tick;

   Third step: enter original password for one time, the password is right if lock sounds two long-beep; when blue light flashing, enter new 8-figure password first time; when red light flashing, enter new 8-figure password second time. Then two short-beep, the password has been changed successfully.

Register Fingerprint

2.5.1 Register management fingerprint

First step: press "1" for 5 seconds,lock sounds "tick", red light lights up;

Second step: press "0" then release the key,lock sounds "tick";

Third step: management and verification: red/blue light is normally on, no management fingerprint; if red/blue light is flashing, management fingerprint exists, put the finger on the window to check; if the lock sounds tick, the screen goes out, pass-through authentication.

Fourth stepred light and screen light up, put the finger on the window, after one short beep, the finger continues to put on the window, until the lock sounds two short-beep, blue light flashing, set fingerprint successfully;

Fifth stepBack to Step 4 to continue the registration. Press any key or wait for 8 seconds finish.

2.5.2 Register user fingerprint

First step: press "1" for 5 seconds,lock sounds "tick", red light lights up;

Second step: press "1" then release the key,lock sounds "tick";

Third step: management and verification: red/blue light is normally on, no management fingerprint; if red/blue light is flashing, management fingerprint exists, put the finger on the window to check; if the lock sounds tick, the screen goes out, pass-through authentication.

Fourth stepred light and screen light up, put the finger on the window, after one short beep, the finger continues to put on the window, until the lock sounds two short-beep, blue light flashing, set fingerprint successfully;

Fifth stepBack to Step 4 to continue the registration. Press any key or wait for 8 seconds finish.

2.5.3 Register temporary fingerprint

First step: press "1" for 5 seconds,lock sounds "tick", red light lights up;

Second step: press "2" then release the key,lock sounds "tick";

Third step: management and verification: red/blue light is normally on, no management fingerprint; if red/blue light is flashing, management fingerprint exists, put the finger on the window to check; if the lock sounds tick, the screen goes out, pass-through authentication.

Fourth stepred light and screen light up, put the finger on the window, after one short beep, the finger continues to put on the window, until the lock sounds two short-beep, blue light flashing, set fingerprint successfully;

Fifth stepBack to Step 4 to continue the registration. Press any key or wait for 8 seconds finish.

biometric fingerprint lock